The temperature of the automatic feeding mixer increases naturally due to its long-term uninterrupted operation. However, if the temperature exceeds the temperature that the equipment can bear, it will damage the equipment. Therefore, if the temperature of the equipment is too high, corresponding maintenance work should be carried out. Let's have a look.
1.防止發動機過熱：由于環境溫度相對較高，因此發動機很容易過熱。必須加強對發動機冷卻系統的檢查和維護，包括對水箱，恒溫器，水泵，風扇等的檢查，并注意及時增加冷卻水的噴射量。當水溫超過100°C時，請在涼爽的地方停車并冷卻，以怠速旋轉發動機，打開引擎蓋以散熱。
1. Prevent the engine from overheating: due to the relatively high ambient temperature, the engine is easy to overheat. It is necessary to strengthen the inspection and maintenance of engine cooling system, including the inspection of water tank, thermostat, water pump, fan, etc., and pay attention to increase the injection amount of cooling water in time. When the water temperature exceeds 100 ° C, stop and cool in a cool place, rotate the engine at idle speed, and open the engine hood to dissipate heat.
2.防止發動機爆燃：夏季高溫，可能超過35℃。具有過時零件的汽車本賽季更容易發生自然爆燃。所以要做好準備。
2. Prevent engine deflagration: high temperature in summer, which may exceed 35 ℃. Cars with obsolete parts are more prone to natural deflagration this season. So be prepared.
3.防止損壞汽車漆：在強烈的陽光下，汽車漆會(huì )變舊并起皺。普通的美容蠟具有一定的防曬作用，但是由于每種汽車蠟都含有硅酮，因此可以持續很長時間。紫外線會(huì )腐蝕油漆，留下黑點。車蠟本身沒有硬度或紫外線防護。相反，它們由于高溫而很快丟失。停車時，盡量將車停在涼爽的地方。
3. Prevent damage to the car paint: in the strong sunlight, the car paint will become old and wrinkle. Ordinary beauty wax has a certain sun protection effect, but because each car wax contains silicone, it can last for a long time. Ultraviolet rays can corrode the paint, leaving black spots. The wax itself has no hardness or UV protection. Instead, they are quickly lost due to high temperatures. When parking, try to park in a cool place.
4.防止輪胎爆裂：高溫使其更容易爆裂。如果溫度太高，則輪胎可能變形并且抗張強度可能降低。于輪胎本身，如果汽車的充氣壓力不符合標準，輪胎老化，性能不佳，或者在行駛過程中輪胎在硬質金屬或其他硬物上滾動，汽車就會(huì )突然爆裂。
4. Prevent tire burst: high temperature makes it easier to burst. If the temperature is too high, the tire may deform and the tensile strength may be reduced. As for the tire itself, if the inflation pressure of the car does not meet the standard, the tire is aging, the performance is poor, or the tire rolls on hard metal or other hard objects during driving, the car will burst suddenly.
5.防止發動機潤滑失效：在高溫下，發動機油的粘度會(huì )降低，抗氧化性會(huì )降低，從而導致潤滑不良。因此，應經常檢查機油的數量和質量，并及時添加或更換。注意及時清潔機油濾清器和散熱器，確保機油沒有被阻塞并具有良好的散熱性，并且不會(huì )使發動機過載。
5. Prevent engine lubrication failure: under high temperature, the viscosity of engine oil will be reduced, and the oxidation resistance will be reduced, which will lead to poor lubrication. Therefore, the quantity and quality of the oil should be checked regularly. Pay attention to clean the oil filter and radiator in time to ensure that the oil is not blocked and has good heat dissipation, and will not overload the engine.
6.防止制動故障：在高溫環境下，制動液容易蒸發并蒸發，在制動管路中產生空氣阻力。另外，制動蹄很容易磨損，制動會(huì )失敗。因此，請務必經常檢查和調整您的制動系統，注意在較長的斜坡上停放并干燥制動器，以確保良好的制動性能。如果制動輪轂很熱，請停止并冷卻，但不要倒入冷水以防止損壞制動輪轂。
6. Prevent brake failure: in high temperature environment, the brake fluid is easy to evaporate and evaporate, resulting in air resistance in the brake pipeline. In addition, the brake shoes are easy to wear and the brake will fail. Therefore, please always check and adjust your brake system, pay attention to park and dry the brake on a long slope to ensure good braking performance. If the brake hub is hot, stop and cool, but do not pour in cold water to prevent damage to the brake hub.
