The production capacity of some mixer trucks is relatively low, and the wheels are installed at the bottom of the mixer, which makes the transfer convenient and fast, so it is common on small construction sites. So what are the operation guidelines? Now let's introduce the operation rules of mixer truck in detail for your reference.
1.攪拌車安裝在平坦堅硬地坪上，水平架起，輪胎不得受力。
1. The mixer truck shall be installed on a flat and hard floor, erected horizontally, and the tires shall not be stressed.
2.工作裝置應緊固可靠，鋼絲繩符合使用標準。
2. The working device should be firm and reliable, and the steel wire rope should meet the use standard.
3.料斗上下限位靈敏可靠，斗車保險掛鉤、機體吊耳完好。
3. The upper and lower limits of the hopper are sensitive and reliable, and the safety hook of the bucket car and the lifting lug of the machine body are intact.
4.傳動部分防護罩完整，操作手柄有保險裝置。
4. The protective cover of the transmission part is complete, and the operating handle is equipped with a safety device.
5.料斗地坑周?chē)鷳獕|高夯實。保護接零接線正確。
5. The hopper pit shall be padded and compacted. The protective neutral connection is correct.
6.設置一機一閘一漏一箱。操作臺儀表、指示信號準確可靠。
6. Set one machine, one switch, one leakage and one box. The instruments and indicating signals on the console are accurate and reliable.
7.設置防雨棚。機械周?chē)麧崯o(wú)泥水。操作規程牌齊全，有維修保養制度。
7. Set up a rainproof shed. The surrounding of the machine is clean and free of muddy water. The operation instruction board is complete, and there is a maintenance system.
在攪拌機的生產過程中，能夠影響混凝土攪拌車攪拌質量的主要因素是：攪拌機的結構形式，攪拌機的加料容量與拌筒幾何容積的比率，混合料的加料程序和加料位置，攪拌葉片的配置和排列的幾何角度，攪拌速度和葉片襯板的磨損狀況等。因此，在進行作業前已經要將上述幾條作業準則認真執行。
In the production process of the mixer, the main factors that can affect the mixing quality of the concrete mixer truck are: the structural form of the mixer, the ratio of the charging capacity of the mixer to the geometric volume of the mixing drum, the charging procedure and location of the mixture, the geometric angle of the configuration and arrangement of the mixing blades, the mixing speed and the wear condition of the blade liner, etc. Therefore, the above-mentioned operation guidelines should be carefully implemented before operation.
此外攪拌車是否質量合格可檢查滾筒內部的攪拌裝置是否選用的高強度耐磨材料，滾筒焊接是否做到了無縫焊接，再有就是攪拌機周身的傳動裝置還有控制系統是否設計合理。
In addition, whether the mixer truck is qualified can be checked whether the mixing device inside the drum is made of high-strength wear-resistant materials, whether the drum welding has achieved seamless welding, and whether the transmission device around the mixer and the control system are designed reasonably.
以上就是對攪拌車七條作業基本準則的介紹，想要了解更多關于攪拌車設備的信息可關注我們網站http://www.zgclmw.com，為您提供有幫助的咨詢信息！
The above is an introduction to the seven basic operation rules of mixer truck. If you want to know more about mixer truck equipment, please follow our website http://www.zgclmw.com , to provide you with helpful consulting information!
