When the brake of the automatic feeding mixer is about to stop, the steering wheel will always tilt to one side. This situation is actually what we usually call "offset braking". The main reason for the failure is that the left and right auxiliary pumps of the automatic feeding mixer brake system do not exert any force on the brake pads. It's caused by. In the process of driving, due to the rapid rotation of the brake disc of the automatic feeding mixer, the difference between the uneven action of the pump and the rapid friction is very small, which is difficult to feel.

在啟動自動上料攪拌車之前，需要十多分鐘來加熱汽車。自動上料攪拌車的制動系統是發動機提供的壓力，用于推動卡鉗以?shī)A緊制動盤（盤式制動器）或推動制動盤以使其與制動鼓摩擦（鼓式制動器）。因此，如上所述的情況可能是提供壓力的傳輸管道中的壓力損失，導致無法及時提供制動力。在這種情況下，請檢查制動總泵的真空助力軟管和自動上料攪拌車發動機的借口是否損壞或松動。

Before starting the automatic feeding mixer, it takes more than ten minutes to heat the car. The brake system of the automatic feeding mixer is the pressure provided by the engine, which is used to push the calipers to clamp the brake disc (disc brake) or push the brake disc to make it friction with the brake drum (drum brake). Therefore, the situation described above may be the pressure loss in the transmission pipe that provides the pressure, resulting in the failure to provide the braking force in time. In this case, please check the vacuum booster hose of the brake master cylinder and the engine of the automatic feeding mixer for damage or looseness.

自動上料攪拌車將不會(huì )返回到制動位置。踩下制動踏板，踏板不會(huì )升起，并且沒有阻力。這種現象是制動器不返回。有必要確定是否缺少制動液，制動缸，管路和接頭是否泄漏以及主缸和缸體零件是否損壞。

The automatic feeding mixer will not return to the brake position. Press the brake pedal, the pedal will not rise, and there is no resistance. This phenomenon is that the brake does not return. It is necessary to determine whether there is a lack of brake fluid, whether the brake cylinder, pipelines and joints are leaking, and whether the master cylinder and cylinder parts are damaged.

正確提高混凝土攪拌站的生產效率

Correctly improve the production efficiency of concrete mixing plant

自動上料攪拌車設備的價值主要在使用階段，這是決定攪拌站設備生命周期的主要環節。任何混合站設備都有一定的使用范圍和特定的使用條件。只有在滿足使用范圍和條件的情況下，攪拌設備才能具有更長的使用壽命。預拌混凝土的生產，運輸和建造對使用預拌混凝土設備（尤其是泵送混凝土）有一定的要求和規定。如果您沒有正確掌握泵送技術，并且不了解泵送條件和使用范圍，將不可避免地導致輸送失敗。此外，攪拌站（建筑物）的測量要求和攪拌車的運輸時間要求正確使用預拌混凝土設備，以產生并獲得經濟利益。

The value of automatic feeding mixer is mainly in the use stage, which is the main link to determine the life cycle of the mixer. Any mixing station equipment has a certain range of use and specific conditions of use. Only in the case of meeting the scope and conditions of use, the mixing equipment can have a longer service life. The production, transportation and construction of ready mixed concrete have certain requirements and regulations on the use of ready mixed concrete equipment (especially pumping concrete). If you do not master the pumping technology correctly, and do not understand the pumping conditions and the scope of use, it will inevitably lead to the failure of transportation. In addition, the measurement requirements of the mixing plant (building) and the transportation time of the mixing truck require the correct use of the ready mixed concrete equipment to generate and obtain economic benefits.